Makes Non Filtered, King Size or 100 mm sizes automatically!
It takes about 6 seconds to make a single cigarette.
About 2 minutes per pack.
And about 20 minutes per carton.
Can you imagine making a pack of
premium quality cigarettes in only 2 minutes!
If you live in a state with high
cigarette costs then this machine will pay for itself quickly.
Here in Indiana, our regular
cigarette costs are $43.40 for a carton. Using our bulk
premium cigarette tobacco at $6.95 for a 6 ounce bag, and a
carton of cigarette tubes (200 tubes) for about $3.00, you can
make about 1 carton of cigarettes for under $20.00 including
shipping costs. That is a savings of over $20.00 per carton
of cigarettes smoked. After 4 cartons of making your own
cigarettes the Roll-N-Smoke Electric Cigarette Machine has paid
for itself. Click on the arrow below to see video.
How to operate the Roll-N-Smoke Electric Cigarette
Machine.
Insert the electric plug into a 110 Volt AC outlet.
Push down lever.
In a rotating motion, place the cigarette tube over the
metal cigarette tube holder, slide to the end and release the lever.
Set the density button on the side of the machine to the
desired tobacco density. Everyone has their own preference about the
density of tobacco. Position 3 is used the most. On position 5
the tobacco has the highest density, position 1 is the lowest density.
you can experiment with the various positions and discover which one suits
you best. (The density is how tight the cigarette will be made.
Of course, the tighter the cigarette is made, the harder the draw will
be.)
Add pure tobacco the the tobacco chamber. Do not
overstuff or press to firmly. You will achieve the best result by
using fresh, moist, expanded (long strands) of pure tobacco.
Tobacco that is powdery is not good to use with this machine.
Press the button on top until the cigarette tube is
completely filled.
You can use King Size, Non Filter, and 100 mm cigarette
tubes that are 8mm size. Most cigarette tubes will fit.
Read the Roll-N-Smoke Electric Cigarette Machine
instructions that are included for more tips and points of special
interest.
After making 20 cigarettes, you will need to let the
machine (metal tube holder) cool off to extend the life of the machine.
David Williams <xxxxxxxx@hotmail.com>
wrote:
Roll-N-Smoke Electric Cigarette Machine, i,m wanting
to know if this is a good and reliable machine. i,m making about 5
cartons a week, so i need one that will stand up to the chore. if
you dont think it will, would you recomend a better machine.
THANK YOU
DAVID A. WILLIAMS
David, the Roll-N-Smoke Electric Cigarette Machine is a good reliable
injecting machine. The pro's are that it works great, has a 2 year
manufacturers warranty, it makes king size and 100mm cigarettes
automatically, and it is cheaper than the others I've seen. The con's
are that it has a small hopper that holds the
tobacco.
I think this machine is great for the money. The only other reliable
machine I've seen that works as good is the Fresh Choice Electric
Cigarette Machine that cost
about $450.00. It has a bigger hopper but only makes king
size cigarettes.
I hope this helps. Randy Biggs Randys Tobacco Shop, Inc.
